Shower Upgrade 101 - Top Tips For New Unit Installation

Shower Upgrade 101 - Top Tips For New Unit Installation

Blog Article

Book A Free Estimate

What're your opinions on How to Install a One-Piece Shower Unit?

A successful shower installation requires careful planning and a lot of job. In most cases, you will certainly require to do 3 kinds of tasks: framing wall surfaces, mounting the plumbing, and also finishing walls.

Prep work

First of all, you need to decide on the sort of shower that you desire to set up. It is very important to determine whether the selected shower is capable of managing particular systems and can regulate a secure degree of water with the central heating boiler. The majority of shower devices nowadays are created to be versatile to different water stress (such as kept warm water as well as cold mains).
It is additionally crucial to consider the water stress and also the planning of the piping and water drainage for the shower

Different Kinds Of Shower Units

Push-on Mixer: The hose pipe and also spray parts of the push-on mixer shower device can be connected to the bathroom faucet as per your need, as well as the water temperature can be readjusted by means of the faucets. Push-on mixers are cheap as well as incredibly simple to set up. However, although the pipe connection is straightforward, it is quickly dislodged. Furthermore, it is inconvenient to change the temperature.

Bath/Shower Mixer: The tube as well as spray of this sort of shower are integrated with a bath mixer faucet, and the temperature level can be adjusted with the bath faucets. It is a very economical choice and also no additional plumbing is entailed. Nevertheless, the bath/shower mixers additionally experience inconvenient temperature level control alternatives.

Handbook Mixer: The tube as well as spray of a hands-on mixer shower unit are a part of the wall surface unit and also the hot and cold water materials are connected to a single shutoff The temperature as well as stress of the water are regulated through either one or a range of knobs (in much more pricey showers). Although temperature control is a lot easier in hand-operated mixer types, they are a lot more expensive than the previously stated mixers. They also need added plumbing of hot and cold water system pipelines.

Thermostatic Mixer: The hose as well as spray of this shower kind are a part of the wall system and also the hot and cold water materials are attached to a single valve right here also. It is complete with a built-in stabiliser to self-adjust the water temperature level and also to prevent it from ending up being also hot. Among the biggest advantages of a thermostatic mixer shower type includes hassle-free temperature level control. However, it is one of the most expensive of the different mixer choices.

Power Shower: A power shower is a solitary device containing a powerful electric pump that is capable of changing both the water stress and also temperature. This type of shower can be fitted if there is supply of water from a cold water tank and also a warm water cyndrical tube. A power shower makes the adjustment of both pressure and temperature simple. On the other hand, it disagrees for water warmed straight by the shower or where the water is provided by a mix central heating boiler under mains pressure.

Electric Shower: An electric shower is plumbed into a mains cold water supply as well as it heats up the water electrically. It is very important to keep in mind that for this shower kind to be mounted, the keys stress requires to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The device permits the temperature level and also stress to be readjusted using a handle. Versions with temperature level stabilisers are much better as they continue to be untouched by various other faucets somewhere else being used within the family. A significant disadvantage of electric showers is that the control knob only allows for the option of high temperatures at much less stress, or reduced temperature levels at a better stress. This is problematic in the winter season when the spray is frequently weak and also the mains water is cooler. Nonetheless, this problem is tackled in some models which are readily available with a winter/summer setup.

Approach

Relying on the kind of shower you want to install, the shower head must either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it should have a check valve.
Prior to beginning, it is a good idea to mark the positions of the shower head and also control, and to plan the pipe-work entailed. Furthermore, the drainage system to remove the drainage will certainly need to be planned. Both placements of the cord route and the shower button will certainly also require to be taken into consideration if an immediate or electric shower device is being set up.
Use the instruction overview offered with the shower unit to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is necessary to cut off the water supply. In order to secure the pipes, they need to be provided a waterproof covering as well as likewise fitted with isolating shutoffs. The pipes can then be hidden into the wall surface as well as glued over to neaten the overall appearance.
Fit the base tray, shower head, as well as fittings.
Attach the primary shower control to the pipes that will be providing the water (This may require a women screw thread adapter).
Reconnect the water supply and also test the pipelines for any type of leaks, as some might require tightening.
If you are mounting an electrical shower, remember to turn off the electrical power supply prior to making any type of electrical links. When these connections have actually been made (there ought to be advice within the user's manual), the power supply can be switched back on.

Readjusting Water Pressure to Match Your Shower

The cold water tank can be raised to a higher height (often as little as 150mm (6inches)) by installation a strong wood support under it - possibly made up of struts and blockboards. If you pick this option, the major and circulation pipes will certainly also need to be raised to satisfy the brand-new height of the tank.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it needs to be connected into the power supply in order to run.

Piping and Water drainage

It is best to use 15mm diameter supply pipelines, and make the go to the shower as short as well as straight as feasible so as to preserve optimal pressure as well as reduce heat loss. Furthermore, by minimising using joints for pipe corners, you can lower the resistance in the flow of the supply of water. You can attain this by bending the pipes rather.

The Majority Of Common Errors

Going against or disregarding regional code constraints.

Using pipes that are also tiny.

Attaching copper to galvanized without utilizing a brass or dielectric fitting in between both.

Not using tape or pipe compound at threaded joints.

Uneven your components when installing them.

Not setting up an air space filling up for components.

Reducing supply stub outs too short to set up the shutoff valves onto after the ended up wall surface remains in place.

Not correctly lining up tubes into fittings or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will cause a leak.).

When transforming the water back on in your house, constantly run the outdoors tube valve or flush your toilets to bleed dirt as well as air from the lines. This particles can trigger troubles in your sink taps and also various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you like reading about How to Build a Shower Enclosure for Your DIY Bathroom? Make a remark down the page. We would be interested to hear your feelings about this write-up. We hope to see you back again soon. Sharing is good. Helping others is fun. I love reading our article about How to Install a Freestand.

Visit My Site

Report this page